Description: The ProLine 2260 offers expanded thickness capability and optimized cutting speeds, and is the highest amperage precision high current density plasma cutting system in the ProLine family.
This manually controlled 275 amp system can cut most metals up to 1 ¼’’ (32.0mm) thick, and has a maximum capacity of 2 ½’’ (65.0mm).
Uncompromising precision cut quality, combined with excellent processing speed and low initial investment, equates to the lowest possible cost to produce quality finished parts.
With the ProLine 2260’s manual controls, you can tailor all of the cutting parameters to your specifications. Optionally, our patented INOVA Torch Height Control System can be built into the ProLine 2260, greatly simplifying installation.
Whether you need precise, clean, virtually dross-free edges on thinner metals or you need the same high quality when cutting 1 inch steel at 65 inches per minute,
the ProLine 2260 can deliver. If your goals include maximum productivity on a wide range of thicknesses, combined with optimum cut quality, economical operation, and modest
initial cost, the ProLine 2260 by KALIBURN is the plasma cutting system for you.
Mild Steel
Production Capacity |
Maximum Thickness
(Edge Start, with dross) |
| 1-¼ (32.0mm) |
2-½ (65.0mm) |
The ProLine 2260 is one of the three systems in the KALIBURN "ProLine" family. The ProLine 2150 and ProLine 2200 Plasma Cutting Systems
offer identical cut quality but each has a unique amperage range and corresponding thickness capacity.
KALIBURN also offers four fully automated machines in the "Spirit" family; the Spirit150a, Spirit200a, Spirit275a, and Spirit400a Plasma Cutting Machines.
These machines are our most advanced systems and provide cut quality identical to the ProLine systems. With Spirit systems, all process parameters are set automatically for ease of operation.
3-YEAR POWER SUPPLY WARRANTY
|
